The sophisticated mailing system called PlusMail(tm) is included as part of your service. In addition to being able to have nearly unlimited infobots by simply adding text files to a directory, you can also redirect mail for everyone in your domain by simply modifying a text file.
Plusmail has a advanced web control panel which allows the ability
to control all aspects of your web presence from a web browser.
NOTE: Due to the unique security requirement of the administration system you must have you browser set to allow cookies. This in conjuction with a number of hidden verification systems assures you are the only user allowed to access these features on your domain.
There is a file in your home (root) directory called .redirect. This file can be edited and reuploaded. Just make sure that each of your redirects is on its own line, with a space between the name and where you want it directed to. Don't add empty lines between entries, and make sure the file is saved in text (ASCII) format, and uploaded in text (not binary) format. When you download it to your hard drive, you will see that it already has a one-line entry that looks like this:
This default line is a way to capture all email that comes to your domain no matter what name is used before the @ sign in the address. If the default line is not listed all email will be bounced except for the email that a alias is listed for in the .redirect file. Below find a example of a default listing, the first redirects all email to your main pop on the system the second redirect email adressed to your main domain to a of site pop.
If you want to redirect other names in your domain to other people, you could make the file look like this, as an example:
This would redirect mail for email@example.com to firstname.lastname@example.org, email@example.com to firstname.lastname@example.org, and all other email in your domain would go to email@example.com, or you can refuse all other email coming in by removing the default line.
The benefit of PlusMail redirects is that you don't need a separate POP account for each email address you want to use in your domain. You can put in your webpages, "Send email to firstname.lastname@example.org" without the need to have a seperate pop account since you can accept all email or only certain aliases by simple entries in the .redirect to your main pop.
Multiple redirection is possible. For instance if you want email to go to two addresses at the same time, enter the different emails with a comma to separate them, no spaces. For example:
Note: You may only forward upto a max of 4 email addresses in the .redirect and they must be listed on a single line.
If more than 4 forwarding addresses are needed use the maillists directory.
Email redirects can be used in conjunction with autoresponders to return an error message to people sending emails to invalid email addresses on your domain. This autoresponder could send back an error message like "Oops, you reached an invalid address, please try again." See "Simple Autoresponders" for how to implement this.
An autoresponder is a simple way of setting up an email address which will return a message automatically when someone sends email to it. Here are the instructions for setting this up.
In your root (home) directory, there is a directory
called infobots. Set up a welcome message in this directory -- you can name
it anything you like, but for our example we'll call it info. Don't call
it info.txt -- just name it plain info with no file extension. The text
for the welcome message could say:
"Thank you for requesting more information
about our webpage design package. We have several design packages to choose
from. Here are our prices..."
Now, whenever someone sends email to: email@example.com they will automatically receive that text email message to whatever email address they specified as their return-to address. It's as simple as that.
How do I see who is using my infobots?
Assume your infobot address is firstname.lastname@example.org.
Just put the following line in your .redirect file.
The original email message will be sent to email@example.com, and the
original sender will get the infobot text. Important Note: Please be sure to put the text file in the infobot directory before putting it in your .redirect or the infobot will not work.
Assume your infobot address is firstname.lastname@example.org.
You can have as many autoresponders as you
want. Just save them all in the infobots directory and give them each a
unique name of anything with between 3-16 characters long.
To make a Plusmail list create a simple text file one address per line
email@example.com firstname.lastname@example.org email@example.com
clients (good name) clients.txt (no good)
To use the list you just need to mail to the name of the list. using the above example with a domain name of fred.com, to email the list you would send to firstname.lastname@example.org. its that simple, note if your maillist is named clients it cannot be used in the infobots directory or the .redirect file.
PlusMail can be setup so your customers
can subscribe to your list via email. There is a limit of 1,000 subscribers per list and you
cannot send email to the list larger than 75k. Here
are the instructions for setting up this list:
1) Set up a welcome message in the infobot directory -- you can name it anything you like, but for our example we'll call it welcome.
The text file could say:
"Welcome to our Maillist. You are now subscribed to our list.
This message will be automatically returned
to the sender each time someone subscribes.
2) Now you need to set up a configuration file to tell the mail system to build a mailing list. In your infobot directory create a file called infolist. This is used to tell the system what to do with addresses received from each infobot response. You can have as many lists as you want. But in keeping with the list example above, we will call it mlist.
Here's what the file should look like:
The first line should have a space between the two names and be uploaded in text format, not binary.
You can have multiple lists, such as mlist1, mlist2, etc., but you should only have one configuration file. It must be called infolist. To handle all three examples, you'd make the infolist file look like this, with each listserver on its own line, with no blank lines in-between:
2A) Now when someone wants to subscribe to
your list in the above example, they would email email@example.com.
This would return the infobot created called "welcome" and put
their email address into the mailing list file in the maillists directory
on your server. You can go in and download the maillist file after it has
been created and people have subscribed. The mailing list file will be created
AFTER the first person subscribes, or if you yourself send email to "firstname.lastname@example.org"
to test it. Put yourself on the mailing list to try this. People don't need
to subscribe themselves -- you can add their names for them, or remove them
at any time by modifying and uploading the file in the "maillists"
directory. People cannot automatically unsubscribe themselves. You must
go in and manually remove their email address from the list.
3) Now when you want to send mail to all
subscribers, you can send email to email@example.com and the PlusMail
system will send it to the entire list.
4) If you want to see who is subscribing to your maillist without having to go and check the maillists file periodically via FTP, you can put a line in your .redirect file. NOTE: it is important that you have the infobot installed before entering the address line in the .redirect. For the mlist example we used above, the line you would add would look like this:
The welcome document you created will be sent to the subscriber, AND you will receive their email message.
Note: When sending email to your list for the first time, you will get the autoresponder email back right away, but you may not see the corresponding maillist file right away, as our system takes time to build it. Wait 15 or 30 minutes or so and it will show up. (Depending on the time of day and current traffic conditions, our servers may be allocating it to a lower priority.)
Website Replication Technology By Becanada Copyright 1996-2017 - used by over 1,000,000+ affiliates daily worldwide.